IB Roof Systems

To download an individual detail simply click on the link, or right click and choose "save as". You can then print directly from the PDF file or save it to your computer for use at a later time.

Download Mechanically Attached Written Specifications
Microsoft Word Format | PDF Format | RTF (Rich Text Format)

Download Complete Mechanically Attached Details (PDF 6.24mb)

Wind Speed Maps
MW-1	Wind Isotach (MPH) Map of Western United States
MW-2	Wind Isotach (MPH) Map of Eastern United States
MW-3	Wind Isotach (MPH) Map of the Gulf States
MW-4	Wind Isotach (MPH) Map of Florida
MW-5	Wind Isotach (MPH) Map of North Eastern United States
MW-6	Wind Isotach (MPH) Map of Alaska

Attachment
MA-1	Fastening Pattern: Screws and Plates
MA-2	Determining Whether You Have a Corner Zone
MA-3	Typical Insulation Layout
MA-4	1 Half Sheet Layout
MA-5	2 Half Sheet Layout
MA-6	3 Half Sheet Layout
MA-7	4 Half Sheet Layout
MA-8	Fire Sheets
MA-9	Fastening Patterns for Insulation
MA-10	Cricket Layout
MA-11	Membrane Cricket Layout

Edge Treatments
ME-1	Edge Termination
ME-2	Butt-Joint Details
ME-3	Clad Edge Metal
ME-4	Peel-Stop Detail
ME-5	Terma-Edge Detail
ME-6	Econo-Snap Edge Detail
ME-7	Back-Wrapped Edge
ME-8	Aluminum Termination Bar Edge
ME-9	Raised Rake Edge
ME-10	Raised Fascia Edge

Base Flashing
MB-1	Stucco Tie-In
MB-2	Siding Tie-In
MB-3	Steep Slope Tie-In
MB-4	Reglet Metal Flashing
MB-5	Termination Bar Detail
MB-6	IB Clad Termination Bar
MB-7	Back-Wrapped Termination Bar
MB-8	Rough Maced Wall Base Flashing
MB-9	Elevation Change Tie-In
MB-10	IB Clad Metal Elevation Change Tie-In
MB-11	Adhered Parapet Wall with Metal Coping
MB-12	Loose Laid High Wall Termination Bar Attachment
MB-13	Loose Laid High Wall Screws & Plates Attachment
MB-14	Backer Strip Attachment
MB-15	Cricket Wall
MB-16	Inside / Outside Corners
MB-17	Roof Curb / Hatch Detail (Canted)
MB-18	Roof Curb / Hatch Detail
MB-19	Encapsulated Support Details
MB-20	WP Hickman Counter Flashings
MB-21	WP Hickman Coping Cap

Expansion / Area Dividers
MX-1	Canted Curb Expansion / Area Divider Detail
MX-2	Curb to Curb Expansion / Area Divider Detail
MX-3	Roof to Wall Expansion Joint Detail

Termination Options for Base Flashings
MT-1	Base Flashing Termination Options Detail

Drains / Scuppers / Overflows
MD-1	Tapered Sump Clamping Ring Drain
MD-2	Clamping Ring Drain
MD-3	Retrofit Drain
MD-4	Drain-Overflow Sump Layout
MD-5	PVC Drop Drains
MD-6	PVC Scupper-Drain
MD-7	Clad Metal Wall Scupper

Penetrations
MP-1	Heater Stack Detail
MP-2	Cone Flashing
MP-3	Stantion Support
MP-4	Roof and Membrane Vents
MP-5	Membrane Vent Over Existing Roof
MP-6	Isolation Pads
MP-7	Chemical Pitch-Pan Detail
MP-8	Pitch-Pan Detail

Misc.
MM-1	T-Joint Patches